Start Up Of The Adjustment Mode - Runco DTV-992 ULTRA Owner's Operating Manual

START UP OF THE ADJUSTMENT MODE

Adjustment mode
All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Two possible ways to enter the adjust-
ment mode:
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General access menu.
Use the control disc to highlight enter ADJUST and press ENTER.
The path selection menu will be displayed.
Note: to adjust the Analog picture control while in the 'Adjustment
mode', press the ADJUST key. The next General Access menu will be
displayed.
Push the control disc up or down to select the analog control to be
adjusted and press the ENTER key to confirm.
When the analog control is adjusted the projector returns automatically
to the General access menu. When you want to return to the Adjustment
mode, press EXIT, otherwise select quit ADJUST and press ENTER to
return to operational mode.
You are now in the 'Adjustment mode'. The control disc is used to make
menu selections and also vertical and horizontal adjustments. The
ENTER and EXIT keys are used to move forward and backward through
the menu structure. The ADJUST key can be used to terminate the
adjustment mode while a path selection menu (head menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode. They
are :
INSTALLATION - Installation should be selected if the projector has
been relocated and/or a different screen size is desired.
When selecting 'Installation', the user or operator will be warned to call
a qualified technician to perform the installation procedure (see exam-
ple of projected warning on next page).
GUIDED - Guided should be selected if the user intends to perform a
complete alignment of the projected image. All of the necessary geom-
etry and convergence adjustments are made in a predetermined
sequence.
General Access From Local Keypad
5-1
ADJUST EXIT
ENTER
STANDBY
GENERAL ACCESS
SHARPNESS
TINT
5 6 COLOR
3 4 BRIGHTNESS
1 2 CONTRAST
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
GENERAL ACCESS
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Quit ADJUST
Select with
or
then <ENTER>
<EXIT> to return
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
EYE-Q
Source 1
Select with or
then <ENTER>
<EXIT> to return
5