Table of Contents
Advertisement
Turn the light switch to L. When the
X
light switch is set to c, you cannot
switch on the rear fog lamp.
Pull the light switch out to the stop.
X
The yellow R indicator lamp on the light
switch lights up.
To switch off the rear fog lamp: press the
X
light switch in as far as it will go.
The yellow R indicator lamp on the light
switch goes out.
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated five times (
page 130) while the
Y
lights are on and the engine is running. When
you switch off the ignition, the automatic
headlamp cleaning system is reset and
counting is resumed from 0.
Combination switch
Turn signals
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
Exterior lighting
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L.
X
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
The K indicator lamp in the instrument
cluster lights up.
To switch off the high-beam
X
headlamps: move the combination switch
back to its normal position.
The blue K indicator lamp in the
instrument cluster goes out.
High-beam flasher
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
X
of arrow =.
123
Z
Advertisement
Chapters
Table of Contents
