Resetting - Mercedes-Benz R 350 Operator's Manual

Sliding sunroof
96
Opening and closing the roller
sunblinds
Overhead control panel
To open
:
To open
;
To close
=
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Press or pull the 2 switch in the
X
corresponding direction.
i
When opening the roller sunblinds, you
can initiate an automatic opening process.
To do so, press the 2 switch briefly
beyond the point of resistance in the
direction of arrow ;. Operate the switch
again to stop the automatic opening
process.
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
! If the panorama roof with power tilt/
sliding panel and the roller sunblind cannot
be fully opened or closed after resetting,
contact a qualified specialist workshop.
Reset the panorama roof with power tilt/
sliding panel and the roller sunblinds if the
panorama roof with power tilt/sliding panel
or the roller sunblinds do not move smoothly.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull the 2 switch repeatedly to the point
X
of resistance in the direction of arrow =
until the panorama roof with power tilt/
sliding panel is fully closed.
Keep the 2 switch pulled for an
X
additional second.
Pull the 2 switch repeatedly to the point
X
of resistance in the direction of arrow =
until the roller sunblinds are fully closed.
Keep the 2 switch pulled for an
X
additional second.
Make sure that the panorama roof with
X
power tilt/sliding panel (
roller sunblinds ( page 96) can be fully
Y
opened again.
If this is not the case, repeat the steps
X
above again.
page 95) and the
Y