Settings - Mercedes-Benz R 350 Operator's Manual

Menus and submenus
206
Settings menu
Introduction
In the

Settings

menu, you have the following
options:
restore the factory settings
R
change the instrument cluster settings
R
R change the time/date settings
change the light settings
R
change the vehicle settings
R
change the convenience settings
R
Restoring the factory settings
Press the V or U button on the
X
steering wheel to select the
menu.
Press and hold the . reset button on the
X
instrument cluster for approximately three
seconds.
A prompt appears in the multifunction
display asking you to confirm by pressing
reset button . again.
Press the . reset button again.
X
The settings of most functions are restored
to the factory settings.
or
If you want to retain the settings, do not
X
press the . reset button a second time.
You will see the Settings
approximately five seconds.
Press the V or U button to select a
X
different menu.
For safety reasons, the function
Running Lamps in submenu
only be reset when the engine is switched off.
12 This function is not available in vehicles with navigation.
Instrument cluster
Selecting the unit of measurement for
distance
This function is only available in Canada.
The Display Unit Speedometer /
Odometer
whether certain displays appear in kilometers
or miles in the multifunction display.
Press the V or U button on the
X
steering wheel to select the
menu.
Press the & button to call up the
X
selection of submenus.
Press the W or X button to select the
12
X
Instrument Cluster
Press the & button to select
X
Unit Speedometer /
Press the W or X button to select
X
Km
distance.
Press the &, V or U button to
X
Settings
select a different display.
The selected unit of measurement for
distance applies to:
analog speedometers
R
the odometer and the trip odometer
R
the trip computer
R
navigation instructions in the Navigation
R
menu
cruise control
R
DISTRONIC
R
Selecting the unit of distance for the
digital speedometer
Press the V or U button on the
menu again after
X
steering wheel to select the
menu.
Press the & button to call up the
X
selection of submenus.
Daytime
Press the W or X button to select the
X
Lighting can
Instrument Cluster
function allows you to choose
submenu.
Odometer.
or Miles as the unit of measurement for
submenu.
Settings
Display
Settings