Odometer - Mercedes-Benz R 350 Operator's Manual

Standard display menu
Standard display
Standard display
Trip odometer
:

Odometer

;
Press the V or U button on the
X
steering wheel to select the standard
display.
To reset the trip odometer: press and
X
hold the . reset button in the instrument
cluster until the trip odometer is reset.
You can select the following functions in the
Standard display menu using the & or
* button:
Tire pressure loss warning (
R
(Canada only)
Tire pressure monitor (
R
only)
Coolant temperature (
R
Y
Digital speedometer or outside
R
temperature ( page 203)
Y
ASSYST PLUS service interval display
R
( page 288)
Y
Engine oil level ( page 285)
R
Y
Displaying the coolant temperature
G WARNING
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated engine can cause
serious burns which can occur just by opening
the engine hood. Stay away from the engine
if you see or hear steam coming from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of the
vehicle and do not stand near the vehicle until
the engine has cooled down.
! If the coolant temperature is over 248 ‡
X
X
Under normal driving conditions, with the
correct anti-corrosion and antifreeze additive
concentration, the reading may rise to
page 319) 248 ‡(120 †) .
Y
Displaying the digital speedometer or
page 320) (USA
Y
outside temperature
page 203)
Digital speedometer
Outside temperature
If you have selected the digital speedometer
for the status bar (
temperature is displayed here.
Menus and submenus
(120 †), do not continue driving. The
engine will otherwise be damaged.
Press the V or U button on the
steering wheel to select the standard
display.
Press the & or * button to select the
coolant temperature.
page 207), the outside
Y
203
Z