Connector and Header
Pin
1
GND
2
SATA_TX_P
3
SATA_TX_N
4
GND
5
SATA_RX_N
6
SATA_RX_P
7
P5V_SATA/GND
Note: SATA DOM requiring external power cannot be used with SATA DOM port on board.
6.4.5 SATA SGPIO Connectors
The server board provides one SATA SGPIO connector.
The pin configuration for the connector is defined in the following table.
6.4.6 Hard Drive Activity LED Header
6.4.7 Intel
®
RAID C600 Upgrade Key Connector
The server board provides one Intel
key) connector on board.
The Intel
RAID C600 Upgrade Key is a small PCB board that has up to two security EEPROMs
®
that are read by the system ME to enable different versions of LSI* RAID 5 software stack.
The pin configuration of connector is identical and defined in the following table.
80
Table 33. SATA Connector
Signal Name
Ground
Positive side of transmit differential pair
Negative side of transmit differential pair
Ground
Negative side of receive differential pair
Positive side of receive differential pair
+5V for DOM (J6D1) or Ground for SATA signals
Table 34. SATA SGPIO Connector
Pin
1
SGPIO_SSATA_CLOCK
2
SGPIO_SSATA_LOAD
3
GND
4
SGPIO_SSATA_DATAOUT0
5
SGPIO_SSATA_DATAOUT1
Table 35. SATA HDD Activity LED Header
Pin
1
LED_HD_ACTIVE_N
2
NC
®
RAID C600 Upgrade Key Connector (storage upgrade
Description
Description
Description
Technical Product Specification
Revision 1.37