Panasonic KX-TDA30 Installation Manual page 343

Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set
to the Hybrid IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to
the Hybrid IP-PBX into the PS. By doing so, the PS will only be registered to the Hybrid IP-PBX
with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS.
Therefore, the PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid
IP-PBX. Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN
near the PS, the PS will not be linked to a different Hybrid IP-PBX during normal
operation after registration.
Setting the PIN for Hybrid IP-PBX
[692]
Changing the Display Language of the PS
Using the KX-TCA155/KX-TCA255
Press POWER
for 2 seconds.
Select
"Select Language".
Using the KX-TD7590
Press POWER
for 5 seconds.
SELECT
Using the KX-TD7580
Press POWER
for 2 seconds.
/
Select "Select
Language".
PIN for PS Registration
1 to 4 digits
ENTER
Select
"Setting Handset".
Select the desired
language.
F
Select
"DISPLAY SETTING".
SELECT
/
Select the desired
language.
/
Select
"Setting Handset".
/
Select the desired
language.
6.7 Connection of DECT Portable Stations — KX-TDA30
ENTER
1234
Select
"Display Option".
SELECT
/
/
Select
"Display Option".
END
SELECT
/
Select
"LANGUAGE".
Installation Manual 343