Panasonic KX-TDA30 Installation Manual page 209

3.3 Installation of the KX-TDA Maintenance Console — KX-TDA100/KX-TDA200
1. Connect the PC to the Hybrid IP-PBX with a
USB cable.
2. Start the KX-TDA Maintenance Console
from the start menu.
3. Type the Installer Level Programmer Code
(default: 1234), then click [OK].
The Programmer Code authorises different
programming levels, and the Quick Setup is
only available when you start the KX-TDA
Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes
with limited authorisation: Administrator
Level (default: 1111), and User Level
(default: none).
4. Click "Connect"
5. Type the system password for installer
(default: 1234), then click [OK] to log-in.
6. When country/area data do not match:
a.
Click [OK] to replace the country/area
data of the Hybrid IP-PBX. Replacement
may take several minutes to complete.
b.
Follow the procedure described in
"2.13.1 Starting the Hybrid IP-PBX" and
restart the Hybrid IP-PBX.
c.
Repeat steps 2 to 4 to restart the KX-
TDA Maintenance Console.
"USB" from the menu bar.
Installation Manual 209