Print A Test Page; Step 1 - Fuji Xerox DocuPrint 203A Quick Setup Manual

QSG_Eng.book Page 8 Tuesday, April 26, 2005 11:03 AM

Step 1

Setting Up Your Printer

Print a Test Page

4
IMPORTANT
Do NOT connect the interface cable.
You will be prompted to connect the interface
cable during the driver installation.
1
Make sure that the printer power switch is
off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
After the printer has finished warming up,
the Ready LED stops blinking and stays
green.
8
Unfold the Support flap.
4
Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
This function won't be available after
the first print job you send from your
PC.
Go to the next page
to install the driver.