QSG_Eng.book Page 21 Tuesday, April 26, 2005 11:03 AM
®
For Mac OS
Connecting the printer to your Macintosh & installing the driver
1
Turn off the printer power switch.
2
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3
Turn on the printer power switch.
4
Insert the CD-ROM into your CD-ROM
drive. Open the Mac OS 9 folder.
9.1 to 9.2 Users
5
Double-click the Print Driver Installer icon
to install the print driver.
Follow the on-screen instructions.
6
From the Apple menu, Open the Chooser.
7
Click the DP203A_204A(IP) icon, and then
select BRN_xxxxxx
button.
*
8
Click the OK button.
Close the Chooser.
*
. Click the Setup...
Where xxxxxx are the last six digits of
the Ethernet address.
Network User's Guide Chapter 7.
The setup is now complete.
21