Load Paper In The Paper Tray - Fuji Xerox DocuPrint 203A Quick Setup Manual

QSG_Eng.book Page 7 Tuesday, April 26, 2005 11:03 AM

Load Paper in the Paper Tray

3
1
Pull the paper tray completely out of the
printer.
2
While pressing the paper guide release lever,
slide the adjusters to fit the paper size.
Check that the guides are firmly in the slots.
For Legal size paper, press in the
inside latches and pull out the back of
the paper tray.
(Legal size paper is not available in
some regions.)
3
4
Paper guide
release lever
5
Fan the stack of paper well to avoid paper
jams and misfeeds.
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
Up to here.
Put the paper tray firmly back in the printer.
Go to the next page
7