Install The Drum Unit Assembly - Fuji Xerox DocuPrint 203A Quick Setup Manual

QSG_Eng.book Page 6 Tuesday, April 26, 2005 11:03 AM
Step 1
Setting Up Your Printer

Install the Drum Unit Assembly

2
CAUTION
Be sure to switch off and unplug the machine
before accessing the interior of the machine.
Access to a live machine's interior can cause
electric shocks.
IMPORTANT
Do NOT connect the interface cable.
You will be prompted to connect the interface
cable during the driver installation.
1
Open the front cover of the printer
Front cover
2
Unpack the drum unit assembly.
6
3
Rock it from side to side several times to
distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the printer.
IMPORTANT
When installing the drum unit assembly, hold
its grip.
5
Close the front cover of the printer.