INITIAL OPERATION
BASIC SETTINGS
• Select language page 9
• Set date and time page 9
• Create channels with switch functions page 11
• Combine switch functions (channels) in a group list page 13
• Assign switch functions (channels) to receivers pages 8 and 12
ASSIGNING CHANNELS OR SWITCH FUNCTIONS
12:29
Mon 25.10.2010
l
ASSIGN THE CHANNEL OF THE HANDHELD TRANSMITTER TO A RECEIVER
– Use the Menu button
– Select the "Channels" menu item in the Settings menu, and activate using the Enter I button.
– Use the cursor button
– Activate the receiver learning mode (see receiver operating instructions).
– Use the Menu button
– If required, adjust the functions and parameters of the receiver (see receiver operating instructions).
NOTE: Press the
button several times to alternately assign the channel to the receiver or delete it. If no list of
channels is displayed, channels must first be created using the switch function. More detailed information on channels
is available on page 11.
ASSIGN SWITCH FUNCTION FROM A GROUP LIST TO A RECEIVER
– Use the Menu button
– Use the cursor button
– Activate the list with the Enter I button.
– Use the cursor button
– Activate the switch function with the Enter I button.
– Activate the receiver learning mode (see receiver operating instructions).
– Assign the switch function (channel) to the receiver with the cursor button
– If required, adjust the functions and parameters of the receiver (see receiver operating instructions).
NOTE: If you press the cursor button several times
the receiver or deleted. If the group list
information on group lists is available on page 13.
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Display group lists
Select Settings menu
l
Switch device on
on the start screen of the handheld transmitter to display the Settings menu.
or
to select a channel from the channel list.
to assign the channel to the receiver (page 12).
to select the group lists via the menu on the handheld transmitter start screen.
or
to select a list from the group lists.
or
to select a switch function (channel) from the list.
is not displayed, then a group list has not yet been created. More detailed
or , the switch function (channel) will be alternately assigned to
or
(page 8).
D - 7