Table of Contents
Advertisement
important SaFety inFormation
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are
used frequently throughout this manual to designate a
degree or level of seriousness and should not be ignored.
Warning indicates a potentially hazardous situation that
if not avoided, could result in personal injury or death.
caUtion indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
Warning:
Shut off all electrical power to the unit before
performing any maintenance or service on the
system. Failure to comply may result in personal
injury or death.
Warning:
Unless noted otherwise in these instructions,
only factory authorized parts or accessory
kits may be used with this product. improper
installation, service, adjustment, or maintenance
may cause explosion, fire, electrical shock or
other hazardous conditions which may result in
personal injury or property damage.
Warning:
these split system air conditioners leave
the factory with a nitrogen holding charge.
Follow all charging instructions for maximum
unit performance and efficiency. Some local
codes require licensed installation/service
personnel to service this type of equipment.
refrigerant charging must be done by qualified
personnel familiar with safe and environmentally
responsible refrigerant handling procedures.
Under no circumstances should the owner
attempt to install and/or service this equipment.
Failure to comply with this warning could result
in property damage, personal injury, or death.
4
caUtion:
this unit uses r-22 refrigerant. do not use
any other refrigerant in this unit. Use of another
refrigerant will damage the unit.
Warning:
the information listed below must be followed
during the installation, service, and operation
of this unit. Unqualified individuals should
not attempt to interpret these instructions or
install this equipment. Failure to follow safety
recommendations could result in possible
damage to the equipment, serious per sonal
injury or death .
• The installer must comply with all national and local
codes and regulations which govern the installation of
this type of equipment. Local codes and regulations
take precedence over any recommendations contained
in these instructions. Consult local building codes and
the National Electrical Code for special installation
requirements.
• All electrical wiring must be completed in accordance
with local, state and national codes and regulations that
take precedence.
• This equipment contains liquid and gaseous refrigerant
under high pressure. DO NOT USE ANY PORTION OF
THE CHARGE FOR PURGING OR LEAK TESTING.
Installation or servicing should only be performed by
qualified trained personnel thoroughly familiar with this
type equipment.
• Fully annealed, refrigerant grade copper tubing should
be used when installing the system. Refrigerant suction
line tubing should be fully insulated.
• This unit is designed for outdoor installations only and
should be located in a position as shown on page 5.
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Advertisement
Table of Contents
