Bidirectional Correction - Roland FJ-42 User Manual

2 Basic Operation

Bidirectional Correction

* Only when the printing direction at the [PRINT QUALITY] menu has been set to [BI-DIRECTION] (bidirectional)
This adjusts slippage when performing bidirectional printing.
Make this adjustment when you have replaced the material with a different type or adjusted the head height.
1
Press the [MENU] key and [
following screen appear on the display.
3 Press the [ENTER] key to start printing a test pattern.
Test pattern
To check the correction value for the high-speed mode (when [ENABLE] is selected for [HIGHSPEED MODE]), examine the upper row.
To check the correction value for the normal mode (when [DISABLE] is selected for [HIGHSPEED MODE]), examine the lower row.
Value with no displacement
+11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1
5
Press the [ ] key to make the following screen
appear on the display.
BIDIRECTION
ADJUST
High-speed mode
BIDIRECTION
ADJUST(HS)
7
Use the [ ] and [
checked in step 4, then press the [ENTER] key.
ADJUST
+0 +5
-15 to +15 (In steps of 1)
High-speed mode
ADJUST(HS)
+0 +7
-30 to +30 (In steps of 1)
32
] key to make the
MENU
BIDIRECTION
Current setting
0 -1 -2 -3 -4 -5 -6
+15 +14 +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1
Value with no displacement
] keys to set the value you
2 Press the [
appear on the display.
4 Check the test pattern and choose a value with no
displacement.
-7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30
0 -1
Current setting
Press the [
6
appear on the display.
] key to make the following screen
BIDIRECTION
TEST PRINT
-2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15
] key to make the following screen
ADJUST
+0 +0
High-speed mode
ADJUST(HS)
+0 +0