Power Off In Daily Operation; When Not In Use For A Prolonged Period - Roland FJ-42 User Manual

Power Off in Daily Operation

If the SETUP LED is lighted, press the [SETUP] key.
1
Hold down for about 1 second.
The SETUP LED goes out
3 Press the [POWER] key to switch off the power.
The carriage moves to the standby position and the head is capped.
If the carriage is already at the standby position, no movement takes place.
The POWER LED goes out

When Not in Use for a Prolonged Period...

NOTICE
Do not switch off the main power with the printing head in an uncapped state (i.e., while the carriage is on the
platen).
If you leave the carriage uncapped for a long time, doing so may result in clogging of the printing head, making
it unusable.
Before switching off the main power, be sure to press the [POWER] key to switch off the sub power for the FJ-
52/42.
1 After carrying out steps 1
to 3 in "Power Off in Daily
Operation," turn off the
main power switch.
* If the unit will be out of use for a month or longer, follow steps 1 through 9 of "3-7 When Moving the Unit..." to wash the printing
heads. Head washing requires three optionally available cleaning cartridges.
Move the sheet loading lever toward the back of the
2
unit and remove the material.
Standby position
Carriage
Unplug the power cord from the electrical outlet.
2
2 Basic Operation
Sheet loading lever
35