Display Menus Flowchart - Roland FJ-42 User Manual

4-4 Display Menus Flowchart

For details about each of the menus, see the "4-5 Description of Keys and Display Menus."
Roland FJ-52
Ver.2.00
When the power is turned
on for the first time, or turned
on after removing the ink
Roland FJ-52
PIGMENT CMYKLcLm
SETUP SHEET
Load the material and press the [SETUP] key
Printable width of
the loaded material
Top
W 1234 mm OP2
menu
FINE BI-DIR
The settings for [PRINT QUALITY]
(Printing Direction) display only in the case
of [BI-DIRECTION].
Settings for [PRINT QUALITY] (Printing Quality)
PHOTO/SUPER/FINE/FINE2/NORMAL/FAST/DRAFT
* When [HIGHSPEED MODE] is set to [ENABLE]
HS-PHOTO/HS-SUPER/FINE/FINE2/NORMAL/FAST/DRAFT
Selecting the language for screen messages
MENU LANGUAGE
ENGLISH
MENU LANGUAGE
JAPANESE
No ink is filled.
Roland FJ-52
UNKNOWN INK TYPE
Select the installed ink
SELECT INK TYPE type and press the
PIG.CMYKLcLm
[ENTER] key.
PIG. CMYKLcLm/PIG. CMYKOrGr/
DYE CMYKLcLm
INSTALL Attach the drain tank,
DRAIN TANK
and press [ENTER] key.
The system will execute
NOW FILLING INK
ink fill.
Settings for [OVER PRINT]
OP2 = Twice /
OP3 = Three times
* Not displayed when set to
[NONE].
Use or to select.
Press the [ENTER] key
to enable the setting.
PRINT QUALITY
FINE
PHOTO/SUPER/FINE/FINE2/
NORMAL/FAST/DRAFT
* When [HIGHSPEED MODE] is set to [ENABLE]
HS-PHOTO/HS-SUPER/FINE/FINE2/NORMAL/FAST/DRAFT
Use or to select.
Press the [ENTER] key to enable the setting.
HEAD CLEANING
Press the [ENTER] key.
START
Head cleaning starts.
Press the [ENTER] key
HEAD CLEANING
to print a test pattern.
TEST PRINT
4 User's Reference
PRINT QUALITY
BI-DIRECTION
UNI-DIRECTION/
BI-DIRECTION
49