Roland FJ-42 User Manual page 43

Press the [CLEANING] key to make the following
1
screen appear on the display.
Press the [ENTER] key, head cleaning starts.
HEAD CLEANING
START
Refer to "2-5 Printing Test" and check the printing-
3
test results.
If a problem is found, repeat the cleaning.
If drop-out persists even after carrying out cleaning several times
1
Press the [MENU] key and [
following screen appear on the display.
3
When head cleaning ends, press the [
display the screen shown in the figure. Press the
[ENTER] key to start the printing test.
HEAD CLEANING
TEST PRINT
If performing cleaning several times at the [POWERFUL] menu does not correct the
drop-out problem
If performing cleaning several times at the [POWERFUL] menu does not correct the drop-out problem, use the included cleaning kit. For
information on how to use the cleaning kit, refer to the documentation included with the kit.
If drop-out persists even after performing cleaning with the cleaning kit, consult your authorized Roland DG Corp. dealer or service
center.
The heads are consumable parts. The useful life is 2 billion dots per nozzle.
] key to make the
MENU
HEAD CLEANING
] key to
2
When head cleaning ends, press the [
display the screen shown in the figure. Press the
[ENTER] key to start the printing test.
HEAD CLEANING
TEST PRINT
2 Press the [ ] key to make the following screen
appear on the display.
Press the [ENTER] key, head cleaning starts ([POW-
ERFUL]).
Refer to "2-5 Printing Test" and check the printing-
4
test results.
If a problem is found, repeat the cleaning.
(The [NORMAL] menu item for [HEAD CLEAN-
ING] does the same thing as [HEAD CLEANING] -
[START] displayed when the [CLEANING] key is
pressed.)
3 Maintenance
] key to
HEAD CLEANING
POWERFUL
41