Operation Of The Uninterruptible Power Supply (Ups); Basic Operations Including Running And Stopping The Unit; When "Ac Input" Plug Is Connected To The Commercial Power Supply In The Power Off; How To Start Operation - Omron BW40T Instruction Manual

3 Operation of the Uninterruptible
Power Supply (UPS)
3-1 Basic operations including running and
stopping the unit
3-1-1 When "AC input" plug is connected to the
commercial power supply in the power off
- Power output is stopped.
- Battery starts automatic charging.
When the power button is OFF with AC input OFF

3-1-2 How to start operation

1.
Press "Power" button for three or more seconds.
- During the self-diagnosis, "FU" is displayed in "Detected Value." The status
display icon is displayed as shown below.
When the self-diagnosis test ends normally, it switches to AC output from the
commercial power supply.
- When the self-diagnosis test isn't executed, it immediately switches to AC output
from the commercial power supply.
Power output outlet
- The battery is charged automatically while running.
BW40T/BW55T/BW100T/BW120T

3 Operation of the Uninterruptible Power Supply (UPS)

3-1Basic operations including running and stopping the unit

Status display
Output the power (in a state where
connected equipment is conducted)
When the power button is OFF with AC input OFF
3
25