Table of Contents
Advertisement
10
Maintenance
• The calibration instrument has been designed with the utmost care. Ease
of operation and simplicity of maintenance have been a central theme in
the product development. Therefore, with proper care the instrument
should require very little maintenance. Avoid operating the instrument in
dirty or dusty environments.
• If the outside of the instrument becomes soiled, it may be wiped clean
with a damp cloth and mild detergent. Do not use harsh chemicals on the
surface, which may damage the paint.
• The calibrator should be handled with care. Avoid knocking or dropping
the calibrator.
• If the mains supply cord becomes damaged, replace it with a cord with
the appropriate gauge wire for the current of the instrument. If there are
any questions, call an Authorized Hart Scientific Service Center (see Sec-
tion 1.3) for more information.
• Before using any cleaning or decontamination method except those rec-
ommended by Hart, users should check with an Authorized Hart Scien-
tific Service Center (see Section 1.3) to be sure that the proposed method
will not damage the equipment.
• If the instrument is used in a manner not in accordance with the equip-
ment design, the operation of the instrument may be impaired or safety
hazards may arise.
10 Maintenance
39
Advertisement
Table of Contents
