7.1 General Menu
The general menu will allow you to access display and network settings for your NVR system.
7.1.1 Display
7.1.1 (a) Output
Video Output: Defaulted to LIVE-OUT.
Slide Show Layout: Set to view channels in sequential mode.
Slide Show Time: Adjust the length of time, between 1 and 300 seconds, that each channel is displayed
during the sequential view. To begin the auto sequence feature, click on the Auto Sequence icon which is
located on the quick access bar.
VGA/HDMI Resolution: Optimize the display resolution to best fit your TV/Monitor. By default the NVR will select
TIP:
Do not select a resolution size larger than your TV/Monitor can accommodate.
a resolution of 1920 x 1080.
Transparency: Modify the menu transparency when displayed on the screen.
Support Overscan: Select this option if using a TV/Monitor that overscans (crops) the NVR footage.
44