Chapter 4: Camera Installation
4.1 Video/Audio
Connect all cameras locally before final placement to ensure that all components function properly.
Locate an included 100 foot Ethernet cable.
1
Insert one end of the Ethernet cable into the cable covers as shown in the image below. Connect the
2
covered end of the Ethernet cable to the camera's power cable.
Input the other end of the Ethernet cable into an open Ethernet port on the back of the NVR.
3
Repeat for each camera, noting the channel number each camera is plugged into.
4
ETHERNET CABLE
ETHERNET CABLE WITH COVER
ETHERNET
Ethernet Cable
WATERPROOF CABLE COVER
CAMERA CABLE
COMPLETION
16