Changing The Tone For A Zone (Zone Select Button); Adjusting The Volume Level For Individual Zones (Zone Level Sliders) - Roland RD-300GX Owner's Manual

Roland rd-300gx owner's manual

Hide thumbs Also See for RD-300GX:

Table of Contents

Changing the Tone for a Zone (ZONE SELECT Button)

When changing the Tone assigned to a Zone, use the ZONE SELECT button to specify

the Zone with the Tone you want to change.

fig.Q1-20p

Press the ZONE SELECT button so the ZONE SELECT indicator for the Zone you wish to

select is lit or blink.

The indicator of the currently selected TONE SELECT button will light in the same color as the

indicator of the selected Zone.

Use the TONE SELECT buttons to select the Tone category, and then use the [DEC] [INC]

buttons to select a Tone.

With the RD-300GX, each of the parts that is performed using the internal sound

generator is referred to as an Internal Zone.

For each Zone (UPPER 1, UPPER 2, and LOWER), you can use the ZONE LEVEL sliders

to adjust the volume of an individual Zone.

fig.Q1-21pe

Zones to which Tones from external sound modules are assigned are called External

Zones. With the RD-300GX, you can control both the External and Internal Zones in the

same manner. For more on the control of External Zone, refer to "Adjusting the Volume

of Each Zone (External Zone)" (p. 57).

The [DUAL] button's indicator will blink if the UPPER 2 Zone is not on, and the [SPLIT]

button's indicator will blink if the LOWER Zone is not on. If you want to play sounds

in each Zone, press the corresponding button so the indicator is lit.

INTERNAL indicator is lit

Use the VOLUME slider when adjusting the overall volume level (p. 20).

Performance

Table of Contents