Step Ring Modulator; Auto Pan - Roland JUNO-Di Owner's Manual

Effects List
12: STEP PHASER
The phaser effect will be varied gradually.
Item Value
4-STAGE, 8-STAGE,
Mode
12-STAGE
Step Rate
0.10–20.00 Hz, note
Mix
0–127
Level
0–127
13: MLT STAGE PHASER
Extremely high settings of the phase difference produce a deep phaser
effect.
Item Value
4-STAGE, 8-STAGE,
Mode
12-STAGE, 16-STAGE,
20-STAGE, 24-STAGE
Rate
0.05–10.00 Hz, note
Mix
0–127
Level
0–127
14: INFINITE PHASER
A phaser that continues raising/lowering the frequency at which the
sound is modulated.
Item Value
Mode
1, 2, 3, 4
Speed
-100–+100
Level
0–127
15: RING MODULATOR
This is an effect that applies amplitude modulation (AM) to the input
signal, producing bell-like sounds. You can also change the modulation
frequency in response to changes in the volume of the sound sent into
the effect.
Item Value
Frequency
0–127
Level
0–127
96
Description
Number of stages in the phaser
Rate of the step-wise change in
the phaser effect
Level of the phase-shifted sound
Output Level
Description
Number of phaser stages
Frequency of modulation
Level of the phase-shifted sound
Output Level
Description
Higher values will produce a
deeper phaser effect.
Speed at which to raise or lower
the frequency at which the sound
is modulated
(+: upward / -: downward)
Output volume
Description
Adjusts the frequency at which modulation is
applied.
Output level
STEP RING MOD
16:

(STEP RING MODULATOR)

This is a ring modulator that uses a 16-step sequence to vary the
frequency at which modulation is applied.
Item Value
Rate
0.05–10.00 Hz, note
Level 0–127
17: TREMOLO
Cyclically modulates the volume to add tremolo effect to the sound.
Item Value
TRI, SQR, SIN, SAW1,
SAW2
Mod Wave
SAW1
Rate
0.05–10.00 Hz, note
Level 0–127
18:

AUTO PAN

Cyclically modulates the stereo location of the sound.
Item Value
TRI, SQR, SIN, SAW1,
SAW2
SAW1
Mod Wave
R
L
Rate
0.05–10.00 Hz, note
Level
0–127
Description
Rate at which the 16-step sequence
will cycle
Output volume
Description
Modulation Wave
TRI: triangle wave
SQR: square wave
SIN: sine wave
SAW1/2: sawtooth wave
SAW2
Frequency of the change
Output Level
Description
Modulation Wave
TRI: triangle wave
SQR: square wave
SIN: sine wave
SAW1/2: sawtooth wave
SAW2
R
L
Frequency of the change
Output Level