Playing Back A Song-[Song List] Button; Selecting Tones By Numbers-[Numeric] Button; Connecting Portable Audio Players And Playing Back - Roland JUNO-Di Owner's Manual

˚
Playing
Press the [PLAY/STOP] button to play back the song, and play the staff labeled "Lead" on the sample
score.
When you press the pedal at the "
board.
Experiment with some variations, such as changing the tones for the Favorites or using the
Split function to play the staff that is shown in gray on the sample score.
Playing Back a Song—[SONG LIST] Button
Important
The JUNO-Di's "Song Player" function enables you to play back songs (audio files/SMF) saved on a USB
Function
memory device.
Songs are played back in the order specified in the "Playlist." When you play back more than one song,
you can use the "Playlist" function to create a list of the songs in the order in which you want to play them
back.
The list of the songs specified in the Playlist is called the "Song List."
To select the songs, connect a USB memory device to the JUNO-Di and press the [SONG LIST] button.
Memo
Memo
Selecting tones by numbers—[NUMERIC] button
Tip
If you turn on the [NUMERIC] button, you can enter numeric values with the buttons [0] to [9].
This enables you to specify and select frequently used tones using numbers.
1.
Press one of the tone buttons.
2.
Press the [NUMERIC] button. The button is lit.
3.
Using the buttons [0] – [9], specify a number.
4.
Press the [ENTER] button to fix the number.
The tone for the specified number is selected.

Connecting portable audio players and playing back

Tip
You can connect an audio device such as an MP3 player to the JUNO-Di's EXT INPUT jack to play back music
from the device.
" mark, the Favorites will switch, changing the tone of the key-
For further information about the Song Player, see "Song Player Settings" (p. 71).
A "Playlist" can be created using the "Playlist Editor" included with the JUNO-Di.
Playing Live
49