Editing The Effects (Mfx/Chorus/Reverb) (Effect Edit) - Roland JUNO-Di Owner's Manual

Editing the Effects (MFX/Chorus/
Reverb) (Effect Edit)
The process of modifying the effect settings is called "effect editing."
You can make effect settings independently for when playing a tone by
itself and for when using Split, Dual, or Super Layer (when the [PERFORM]
button is lit).
When playing a single tone
You can use multi-effect (MFX), chorus, and reverb for each tone.
When playing more than one tone
For each setting, you can use a maximum of three multi-effects (MFX1,
MFX2, MFX3), one chorus, and one reverb. For Split or Dual, you can use
two multi-effects (MFX1, MFX2).
The details are as follows.
For Super Layer
MFX1 applied to all parts.
For Split
MFX1 applied to upper, MFX2 applied to lower.
For Dual
MFX1 applied to part 1, MFX2 applied to part 2.
Otherwise
You can use the included "JUNO-Di Editor" to edit MFX1–3.
Use the included "JUNO-Di Editor" if you want to make detailed
settings for the MFX used by each part.
1.
Press the [MENU] button.
The "MENU" screen will appear.
2.
Use the [ ] [ ] buttons to select "EDIT," and press
the [ENTER] button.
3.
Use the [ ] [ ] buttons to make the desired effect
appear in the upper line of the screen.
The available effects will depend on the current selection.
When only one tone is selected
"MFX," "CHORUS," "REVERB"
When using Super Layer
"MFX1," "CHORUS," "REVERB"
When using Split or Dual
"MFX1," "MFX2," "CHORUS," "REVERB"
Otherwise
"MFX1," "MFX2," "MFX2," "CHORUS," "REVERB"
fig.disp-mfxedit.eps_70
You can access the edit screen of step 3 by holding down the
[SHIFT] button and pressing the [PIANO] button.
4.
Use the [ ] [ ] buttons to move the cursor to the
item that you want to edit.
5.
Use the dial to set the desired value.
MFX1–3
Item Value
MFX 1–3
OFF, ON
switch
00: THRU–79:
VOCODER 00–79
(MFX Type)
The editable items for the selected MFX type will be
Items for each displayed.
MFX type Refer to "Multi-Effects Parameters (MFX1–3, MFX)" (p.
93).
Cho Send
0–127
Level
Rev Send
0–127
Level
CHORUS
Item Value
Chorus switch OFF, ON
00: OFF–03:
GM2 CHORUS 00–03
(Chorus Type)
Items for each Edit the parameters for the selected chorus type.
chorus type Refer to "Chorus Parameters" (p. 104).
REVERB
Item Value
Reverb switch OFF, ON
00: OFF–05:
GM2 REVERB 00–05
(Reverb Type)
Items for each Edit the parameters for the selected reverb type.
reverb type Refer to "Reverb Parameters" (p. 104).
6.
Press the [EXIT] button to leave the edit screen.
Detailed Tone Settings
Description
Specifies whether MFX 1–3 will be used
(ON) or not used (OFF).
* This setting is common to the entire
JUNO-Di.
* This setting cannot be saved.
Selects the types of multi-effects that
MFX1–3 will use.
Choose "00: THRU" if you don't want to
apply a multi-effect.
Adjusts the amount of chorus for the
sound that passes through multi-effects.
If you don't want to add the chorus effect,
set it to "0."
Adjusts the amount of reverb for the
sound that passes through multi-effects.
If you don't want to add the reverb effect,
set it to "0."
Description
Specifies whether chorus will be used
(ON) or not used (OFF).
* This setting is common to the entire
JUNO-Di.
* This setting cannot be saved.
Selects the types of chorus.
Choose "00: OFF" if you don't want to
apply a chorus.
Description
Specifies whether reverb will be used (ON)
or not used (OFF).
* This setting is common to the entire
JUNO-Di.
* This setting cannot be saved.
Selects the types of reverb.
Choose "00: OFF" if you don't want to
apply a reverb.
61