Roland JUNO-Di Owner's Manual page 100

Effects List
45: SERIAL DELAY
This delay connects two delay units in series.
Item Value
Delay 1 Time
0–1300 msec, note
Delay 2 Time
0–1300 msec, note
Feedback
-98–+98%
Balance
D100:0W–D0:100W
46: MODULATION DELAY
Adds modulation to the delayed sound.
Item Value
0–1300 msec,
Delay Time
note
Feedback
-98–+98%
D100:0W–
Balance
D0:100W
47: 3TAP PAN DELAY
Produces three delay sounds; center, left and right.
Item Value
0–860 msec,
Delay Time
note
Feedback
-98–+98%
D100:0W–
Balance
D0:100W
48: 4TAP PAN DELAY
This effect has four delays.
Item Value
0–650 msec,
Delay Time
note
Delay 1
-98–+98%
Feedback
D100:0W–
Balance
D0:100W
100
Description
Delay time from when sound is
input to delay 1 until the delay
sound is heard
Delay time from when sound is
input to delay 2 until the delay
sound is heard
Proportion of the delay sound that
is to be returned to the input of
delay (negative values invert the
phase)
Volume balance of the original
sound (D) and delay sound (W)
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound that's
fed back into the effect.
Negative (-) settings invert the phase.
Volume balance between the direct sound
(D) and the delay sound (W)
Description
Delay time from the original sound until the
delay sound is heard.
Adjusts the amount of the delay sound that's
fed back into the effect.
Negative (-) settings invert the phase.
Volume balance between the direct sound
(D) and the delay sound (W)
Description
Adjusts the time from the original sound
until delay sounds are heard
Adjusts the amount of the delay sound that's
fed back into the effect.
Negative (-) settings invert the phase.
Volume balance between the direct sound
(D) and the delay sound (W)
49: MULTI TAP DELAY
This is a variation of delay in which four delayed sounds are heard.
Item Value
0–650 msec,
Delay Time
note
Delay 1
-98–+98%
Feedback
D100:0W–
Balance
D0:100W
50: REVERSE DELAY
This is a reverse delay that adds a reversed and delayed sound to the
input sound.
Item Value
Rev Dly
0–1300 msec, note
Rev Dly Fback
-98–+98%
Balance
D100:0W–D0:100W
51: SHUFFLE DELAY
Adds a shuffle to the delay sound, giving the sound a bouncy delay effect
with a swing feel.
Item Value
0–2600 msec,
Delay Time
note
Shuffle
0–100
Rate
Feedback
-98–+98%
52: 3D DELAY
This applies a 3D effect to the delay sound. The delay sound will be
positioned 90 degrees left and 90 degrees right.
Item Value
Delay Time
0–860 msec, note
Center
-98–+98%
Fback
Balance D100:0W–D0:100W
Description
Adjusts the time until Delays are heard.
Adjusts the amount of the delay sound that's
fed back into the effect.
Negative (-) settings invert the phase.
Volume balance between the direct sound
(D) and the effect sound (W)
Description
Delay time from when sound is
input into the reverse delay until
the delay sound is heard
Proportion of the delay sound that
is to be returned to the input of
the reverse delay (negative values
invert the phase)
Volume balance of the original
sound (D) and delay sound (W)
Description
Adjusts the time until the delay sound is
heard.
Adjusts the ratio (as a percentage) of the time
that elapses before Delay B sounds relative to
the time that elapses before the Delay A
sounds.
When set to 100, the delay times are the
same.
Adjusts the amount of the delay that's
feedback into the effect.
Negative (-) settings invert the phase.
Description
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect.
Negative (-) settings will invert
the phase.
Volume balance between the
direct sound (D) and the effect
sound (W)