Performing; Playing Various Tones; Selecting A Tone; Saving Your Performance Settings (Registration) - Roland HP702 Owner's Manual

° Performing

Playing Various Tones

Selecting a Tone

In addition to piano sounds, the piano lets you enjoy performing with
many other sounds. There are four groups of tones; each tone button
selects a group.
& Refer to the "Tone List" at the end of this manual.
Tone groups
Button Explanation
[Piano] button Grand piano tones
[E. Piano] button Electric piano tones
The tones of string instruments such as violins,
[Strings] button
as well as other instruments used in orchestras
Selects a variety of tones such as organ or
accompaniment sounds.
* If you've selected an organ sound that
[Other] button
provides a rotary effect which simulates the
sound of rotating speakers, pressing the
[Other] button will switch the speed of the
rotary effect
[Registration]
Performance settings that you registered
button
1.
Press a tone button (e.g., [Piano]).
The tone group is selected. The name of the currently selected
tone is shown.
2.
Turn the [ ] knob.
You can select other tones in the tone group.
Selecting tones from the [Other] button
Selects the next tone.
When you reach the last tone in the
Turn the [ ] knob
category, tones from the next category are
selected.
Selects the tone category. You can turn the
Press the [ ] knob
[ ] knob to change to another category.
8
Tone name
Category
Tone name

Saving Your Performance Settings (Registration)

Lets you register your favorite performance settings so that you can
easily recall those settings while you perform.
Such settings are called a "Registration. " You can save a total of 36
registrations, 9 each in buttons [1]–[4]. These 36 registrations are
collectively called a "Registration set. "
1-9 2-9 3-9
1-1 2-1 3-1
36 registration
Registration set
Settings that are saved in a registration
Setting
The selected tone (including Split or Dual tones)
Ambience
Rotary Speed
Key Touch
Transpose
Split on/off
Split point
Left Shift
Right Shift
Dual on/off
Tone 1 Shift
Tone 2 Shift
Balance (Split, Dual)
Twin Piano on/off
Twin Piano Mode
Damper Pedal Part
Center Pedal
Left Pedal
MIDI Transmit Ch.
Recalling and editing a registration
1.
Press the [Registration] button.
2.
Press a number button ([1] to [4]) to choose the
location where the desired registration is saved.
3.
Turn the [ ] knob to select the registration
variation.
The selected registration is recalled.
MEMO
You can also use a pedal to recall registrations (p. 26).
4.
To edit the selected registration, press the [ ] knob
and then turn the [ ] knob toward the right.
MEMO
If you press the [Registration] button to exit the Registration
screen, you will return to the state prior to recalling the
registration.
4-9
4-1
Page
p. 8, p. 10
p. 16
p. 8
p. 16
p. 11
p. 10
p. 10
p. 10
p. 10
p. 10
p. 10
p. 10
p. 10
p. 24
p. 24
p. 25
p. 25
p. 26
p. 26