Table of Contents
Advertisement
6
Commissioning
6 Commissioning
42
Building Technologies
Fire Safety
When the battery connector is connected, the radio fire detector FDOOT271 is
activated. Once inserted into the detector base, the radio fire detector automatically
looks for radio devices within range in the vicinity and automatically integrates itself
into the radio network.
You will find the procedure for logging on and creating a radio cell in document
A6V10227639.
You must fully commission a radio cell before establishing the connection to the
FDnet/C-NET.
Insert the battery packs into the devices at the location where they are going to be
used just before commissioning the fire detection installation.
The device is commissioned via the control panel. The exact procedure is
described in the control panel documentation.
Conduct a performance check once commissioning is complete.
See also the following documents for more information:
Document A6V10227639
l
Document A6V10227631
l
See also
2 Applicable documents [➙ 7]
A6V10227635_g_en_--
2015-03-11
Advertisement
Table of Contents
