Table of Contents
Advertisement
4 Planning
4.1 Compatibility FDnet/C-NET
Building Technologies
Fire Safety
The radio connection means that there is no need to wire the radio devices,
such as the radio fire detector, radio manual call point, etc., in the usual way.
Together with the radio gateway, the radio devices form a radio cell. The control
panel treats this radio cell as a loop or a stub. It is used for the 'Sinteso' and
'Cerberus PRO' product lines.
In the 'Planning' document (A6V10227631), you will find detailed information about
the components of the radio fire detection system as well as the necessary devices
and device combinations.
You will find more information in the 'List of compatibility'.
See also
2 Applicable documents [➙ 7]
2 Applicable documents [➙ 7]
Compatible with control panels that support the FDnet/C-NET detector line.
Detector line
FC20xx
FDnet
From MP5
C-NET
X = compatible
– = not compatible
You will find detailed information in the 'List of compatibility'.
Control panel
FC72x
X
–
–
X
From IP5
Planning
Compatibility FDnet/C-NET
SIGMASYS
AlgoRex
–
–
A6V10227635_g_en_--
2015-03-11
4
–
–
27
Advertisement
Table of Contents
