Installing The Radio Fire Detector Fdoot271 - Siemens FDOOT271 Technical Manual

5 Mounting / Installation

Installing the radio fire detector FDOOT271

5.3 Installing the radio fire detector FDOOT271
36
Building Technologies
Fire Safety
The action of inserting the radio fire detector into the detector base activates it;
the detector then logs on to other radio devices immediately. Therefore, start from
the radio gateway and work outwards to install the individual radio fire detectors.
1
2
3
4
5
Installing the radio fire detector
1 Battery pack BAT3.6-10
1
2 Inserting the battery pack
3 Holder
not included in the scope of delivery
1
The flashing behavior of the internal alarm indicator is described in the technical
manual A6V10227635 provided by the manufacturer in the 'Internal alarm
indicator [➙ 20]' chapter.
w The radio gateway has been activated and switched to maintenance mode.
w The radio fire detector is set to the factory settings.
w You have the battery pack and the required accessories to hand.
w The detector base FDB271 is installed [➙ 35].
4 Battery cable
5 Battery connector
A6V10227635_g_en_--
2015-03-11