Setting Effects For A Rhythm Set (Effects/Mfx/Mfx Control/Chorus/Reverb) - Roland Fantom-X6 Owner's Manual

Creating a Rhythm Set
Tone Chorus Send (Send Level (Output=non
3
MFX))
Sets the level of the signal sent to chorus for each tone if the tone is
not sent through MFX.
Value: 0–127
Tone Reverb Send (Send Level (Output=non
4
MFX))
Sets the level of the signal sent to reverb for each tone if the tone is
not sent through MFX.
Value: 0–127
96
Setting Effects for a Rhythm Set
(Effects/MFX/MFX Control/Chorus/
Reverb)
For details regarding effect settings, refer to the pages shown
below.
• "Applying Effects in Patch Mode" (p. 207)
• "Making Multi-Effects Settings (MFX1–3)" (p. 213)
• "Making Chorus Settings (Chorus)" (p. 215)
• "Making Reverb Settings (Reverb)" (p. 216)