Editing The Part Settings - Roland Fantom-X6 Owner's Manual

Playing in Performance Mode
Selecting in the Mixer Screen
1.
Press [MIXER] to access the MIXER screen.
2.
Use or to select a part.
3.
Use to move the cursor to the patch number.
fig.08-014
4.
Turn the VALUE dial or use [INC] [DEC] to select a patch.
Selecting the Rhythm Set
1.
Press [MIXER] to access the MIXER screen.
2.
Use or to select a part.
3.
Use to move the cursor to the following location.
fig.08-015
4.
Turn the VALUE dial or press [INC] [DEC] to select "R."
The rhythm set will be selected.
104

Editing the Part Settings

In the Mixer screen you can set the following parameters for each
part.
Performance Mixer1 screen
Parameter
Part Level (p. 108)
Part Pan (p. 108)
Part Reverb Send (p. 108)
Part Chorus Send (p. 108)
Solo Switch (p. 105)
Mute Switch (p. 105)
Performance Mixer2 screen
Parameter
Keyboard Switch (p. 110)
Arpeggio Part (p. 130)
Pad Part (p. 161)
Part Coarse Tune (p. 109)
Output Assign (p. 108)
1.
Press [MIXER].
The Performance Mixer 1 screen will appear.
* If you want to edit the parameters of the Performance Mixer 2 screen,
press [F6] to switch screens.
fig.04-016_50
2.
Use or to move the cursor to the parameter you
want to edit.
3.
Use or to move the cursor to the part that you want
to edit.
4.
Turn the VALUE dial or use [INC] [DEC] to set the desired
value.
The green border enclosing four parts corresponds to the four
REALTIME CONTROL knobs.
Shown in the Mixer screen
as
Level
Pan
Rev
Cho
S
M
Shown in the Mixer screen
as
K
A
P
Key
Output Assign