Roland Fantom-X6 Owner's Manual page 65

Roland owner's manual cd player fantom-x6, fantom-x7, fantom-x8
Hide thumbs Also See for Fantom-X6:
Table of Contents

Advertisement

Booster 1&2, 3&4 (Booster Gain)
When a Structure Type of TYPE 3 or TYPE 4 is selected, you can
adjust the depth of the booster. The booster increases the input
signal in order to distort the sound. This creates the distortion effect
frequently used with electric guitars. Higher settings will produce
more distortion.
Value: 0, +6, +12, +18
Booster
The Booster is used to distort the incoming signal.
fig.06-024.e
Booster level
In addition to using this to create distortion, you can use the
waveform (WG1) of one of the tones as an LFO which shifts the
other waveform (WG2) upward or downward to create
modulation similar to PWM (pulse width modulation). This
parameter works best when you use it in conjunction with the
Wave Gain parameter (p. 63).
fig.06-025.e
Uses WG1 as LFO
WG1
TVA
WG2
WG2
Adds to WG1
Shift in waveform by WG1
Adjusts WG1 output
Booster
Distorted area of the
Waveform changes
Ring Modulator
A ring modulator multiplies the waveforms of two tones with
each other, generating many new overtones (in harmonic
partials) which were not present in either waveform. (Unless
one of the waveforms is a sine wave, evenly-spaced frequency
components will not usually be generated.)
As the pitch difference between the two waveforms changes the
harmonic structure, the result will be an unpitched metallic
sound. This function is suitable for creating metallic sounds
such as bells.
fig.06-026
Key Fade Lower (Keyboard Fade Width
Lower)
This determines what will happen to the tone's level when a note
that's lower than the tone's specified keyboard range is played.
Higher settings produce a more gradual change in volume. If you
don't want the tone to sound at all when a note below the keyboard
range is played, set this parameter to "0."
Value: 0–127
Key Range Lower (Keyboard Range Lower)
1
Specifies the lowest note that the tone will sound for each tone.
Value: C-1–UPPER
Key Range Upper (Keyboard Range Upper)
2
Specifies the highest note that the tone will sound for each tone.
Value: LOWER–G9
If you attempt to raise the lower key higher than the upper key,
or to lower the upper key below the lower key, the other value
will be automatically modified to the same setting.
Creating a Patch
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fantom-x7Fantom-x8X-7X-8

Table of Contents