Importing An Audio File; Displaying Sample Edit Screen; Magnifying/Shrinking The Waveform Display (Zoom In/Out) - Roland Fantom-X6 Owner's Manual

Editing a Sample

Importing an Audio File

Here's how an audio file (WAV/AIFF) can be loaded into memory
as a sample.
Place the audio files in the "TMP/AUDIO_IMPORT" folder on
the user memory or memory card. For details on how you can
use your computer to copy a file into the user area or memory
card, refer to p. 218.
1.
From the Sample List screen or Sample Edit screen (p. 148),
press [MENU] to select "Import Audio," and then press
[ENTER].
* You can obtain the same result by pressing [SAVE/LOAD] and then
pressing [F8 (Import Audio)] instead of performing step 1.
2.
Press [F1 (User)] or [F2 (Card)] to select the import-source
area.
User: Select a file from the user area.
Card: Select a file from the memory card.
3.
Use [CURSOR] to move the cursor to the "TMP/
AUDIO_IMPORT."
4.
Press or , then select the file that you want to
import.
If you want to select two or more samples, press [F5 (Mark Set)]
to add a check mark (✔) to the files that you want to select. To
remove the check mark, press [F4 (Mark Clear)].
If you hold down [SHIFT] and press [F5 (Mark Set All)], a check
mark will be added to all files of the selected folder. If you hold
down [SHIFT] and press [F4 (Mark Clr All)], check marks will
be removed from all selected files.
5.
Press [F8 (Import Audio)].
A message will ask you for confirmation.
* To cancel, press [F7 (Cancel)].
6.
Press [F8 (Exec)].
The file will be imported, and the Sample List screen will
appear.
* To cancel, press [F7 (Cancel)].
The imported file will be added to the sample list as a sample.
This sample is temporary, and will be lost when you turn off the
power. If you want to keep it, press [WRITE] to save the data.
148
Displaying Sample Edit
Screen
1.
When you press [SAMPLE EDIT] in the sampling section.
The Sample Edit screen will appear.
fig.14-007_50
Samples that you edit will be lost when you turn off the power.
If you want to keep them, you must Save them (p. 159).
Magnifying/Shrinking the
Waveform Display (Zoom In/Out)
Here's how to change the magnification of the sample display.
1.
In the Sample Edit screen, press [F7 (Zoom In/Out)].
The Zoom In/Out sub-window will appear.
fig.15-002_50
2.
Use [CURSOR] to change the magnification of the display.
• Horizontal axis (time axis): 1/1–1/65536
Press to increase the display magnification.
Press to decrease the display magnification.
* Either turn the VALUE dial or use [INC], [DEC] to adjust this
setting.
• Vertical axis (waveform amplitude axis): x1–x128
Press to increase the display magnification.
Press to decrease the display magnification.
3.
Press [F8 (Close)] to close the sub-window.
Even without displaying the Zoom In/Out sub-window, you
can press CURSOR to expand/shrink the horizontal
axis, or hold down [SHIFT] and press CURSOR
expand/shrink the vertical axis.
to