Snmp Defaults - Supermicro SSE-G24-TG4 Configuration Manual

SNMP Configuration Guide
In stacking cases, the port channel interface ifIndex starts after the physical interfaces of all the stack
switches. The ifIndexes for all the stack physical interfaces are assigned irrespective of the presence of
the particular member switch.
Switch 0 Switch 1
1G | 10G | 40G 1G | 10G | 40G

1.4 SNMP Defaults

Function
SNMP Agent Status
SNMP Sub-Agent Status
Version
Engine Id
Communities
Users
Authentication
(for default users)
Privacy
(for default users)
Groups
Access
View (for default groups)
Notify View Name
Read, Write, Notify
Target Parameters
Storage Type
Context
SNMP Port
SNMP Trap Port
Trap Status
Authentication Trap
Switch 2 to Switch 16
Similar to Switch 0 and 1
Default Value
Enabled
Disabled
3
80.00.08.1c.04.46.53
PUBLIC,
NETMAN
initial,
TemplateMD5,
TemplateSHA
initial : none
TemplateMD5: MD5
TemplateSHA: SHA
initial : none
TemplateMD5: none
TemplateSHA: DES
iso,
initial
iso,
initial
iso: iso,
initial: restricted
iss,
iss1
Iso
Internet,
test1
Volatile
None
161
162
Enabled
Disabled
Supermicro L2/L3 Switches Configuration Guide
Port
Layer 3
Channel
Interfaces
9