Igmp Snooping Support; Igmp Snooping Defaults - Supermicro SSE-G24-TG4 Configuration Manual

IGMP Snooping Configuration Guide
Figure IGS-2: Multicast Forwarding with IGMP Snooping
Source A
Receiver 1

1.2 IGMP Snooping Support

Supermicro switches support IGMP snooping for all three IGMP versions (1, 2 and 3).
Supermicro switches support forwarding of multicast traffic based on MAC and IP addresses.
Supermicro switches support up to 255 multicast groups.

1.3 IGMP Snooping Defaults

Parameter
IGMP snooping global status
IGMP snooping status in VLAN
Multicast forwarding mode
Send query on topology change
Proxy report
Router port purge interval
Port purge interval
Report forward interval
Group specific query interval
Forwarding reports
Group specific query retry count
IGMP version
Immediate leave (fast leave)
Querier
Switch A
Receiver 2
Default Value
Disabled
Disabled
MAC Based
Disabled
Enabled
125 seconds
260 seconds
5 seconds
2 seconds
To only router ports
2
3
Disabled
Non-querier
Supermicro L2/L3 Switches Configuration Guide
Switch B
Multicast
Traffic
6