View - Supermicro SSE-G24-TG4 Configuration Manual

SNMP Configuration Guide
------------------------------
Security Model: v3
Security Name: initial
Group Name: initial
Storage Type: Non-volatile
Row Status: Active
------------------------------
Security Model: v3
Security Name: templateMD5
Group Name: initial
Storage Type: Non-volatile
Row Status: Active
------------------------------
Security Model: v3
Security Name: templateSHA
Group Name: initial
Storage Type: Non-volatile
Row Status: Active
------------------------------

1.6.5 View

A view specifies limited access to MIBs. A view can be associated with one or many groups.
In an SNMP, parameters are arranged in a tree format. SNMP uses an Object Identifier (OID) to identify
the exact parameter in the tree. An OID is a list of numbers separated by periods.
Follow the steps below to configure the SNMP view.
Step Command
Step 1 configure terminal
Step 2 snmp view <ViewName> <OIDTree> [mask
<OIDMask>] {included | excluded} [{volatile |
nonvolatile}]
Description
Enters the configuration mode
Configures the SNMP view.
ViewName- Alphanumeric value with a
maximum of 40 characters.
OIDTree – OID number, with a
maximum of 32 numbers.
OIDMask – OID number, with a
maximum of 32 numbers.
Use included to specify that the MIB
sub-tree is included in the view.
Use excluded to specify that the MIB
sub-tree is excluded from the view.
Supermicro L2/L3 Switches Configuration Guide 17