Supermicro SSE-G24-TG4 Configuration Manual page 24

SMIS(dhcp-config)# lease infinite
SMIS(dhcp-config)# utilization threshold 50
SMIS(dhcp-config)# host hardware-type 1 client-identifier 00:A0:23:C9:12:FF option 10 IP 10.10.10.1
SMIS(dhcp-config)# default-router 192.168.1.10
SMIS(dhcp-config)# exit
SMIS(config)#ipdhcpbootfileabcboot
SMIS(config)# ipdhcp next-server 172.17.10.3
SMIS(config)# ipdhcp ping packets
SMIS(config)# end
SMIS# show ipdhcp server information
DHCP server status: Enabled
Send ping packets: Enabled
Debug level: None
Server address reuse timeout: 5 secs
Next server address: 172.17.10.3
Boot file name: abcboot
SMIS# show ipdhcp server pools
Pool Id: 1
-------------------------------------------
Subnet: 200.200.0.0
Subnet mask: 255.255.0.0
Lease time: 2147483647 secs
Utilization threshold: 50%
Start Ip: 200.200.0.1
End Ip: 200.200.255.255
Exclude address start IP: 200.200.20.20
Exclude address end IP: 200.200.20.30
Subnet Options
--------------
Code: 1, Value: 255.255.0.0
Code: 3, Value: 192.168.1.10
Code: 6, Value: 10.10.10.1
Code: 15, Value: supermicro.com
Code: 19, Value: 1
Code: 44, Value: 172.16.1.3
Code: 46, Value: 8
Host Options
------------
Supermicro L2/L3 Switches Configuration Guide 24