Supermicro SSE-G24-TG4 Configuration Manual page 22

Step 14 end
Step 15 show ipdhcp server pools
The "no ipdhcp pool <index (1-2147483647)>" command deletes the DHCP pool
configuration.
These commands delete values or reset to default values, as applicable:
no network
no excluded-address <low-address> [<high-address>]
no domain-name
no dns-server
no netbios-name-server
no netbios-node-type
no default-router
no option <code (1-2147483647)>
no lease
no utilization threshold
no host hardware-type <host-hardware-type (1-2147483647)> client-identifier <client-
mac-address> option <code (1-2147483647)>
1.6.6.1.1 Configuring Other Parameters
Follow the steps below to configure the DHCP server parameters.
Step Command
mac-address - Specifies the MAC
address of a DHCP client in dotted
hexadecimal notation.
1.6.5
string - ASCII-format representation of
a MAC address
1.6.6
address - Specifies the IP address and
network mask for a manual binding to a
DHCP client.
Exits the configuration mode.
Displays the DHCP pool configuration.
Description
Supermicro L2/L3 Switches Configuration Guide 22