Supermicro SSE-G24-TG4 Configuration Manual page 19

DHCP pool index
DHCP network IP
Excluded address
Domain name
DNS server
NetBIOS name server
NetBIOS node type
DHCP option
Lease
Utilization threshold
Default router
Hardware address
Client ID
Bootfile
Next-server
DHCP ping
Offer reuse
1.6.1.9.1 Enabling a DHCP Server
The DHCP server is disabled by default in Supermicro switches. Follow the steps below to enable a DHCP
server.
Step Command
Step 1 configure terminal
Step 2 service dhcp-server
Step 3 end
Step 4 show ipdhcp server information
The DHCP relay must be disabled before enabling the DHCP server.
The 'noservice dhcp-server' command disables the DHCP server.
1.6.1.9.2 Configuring the DHCPPool
Follow the steps below to configure the DHCP server pool.
Step Command
Step 1 configure terminal
ipdhcp pool <index (1-2147483647)>
Step 2
None
None
None
None
None
None
None
None
3600
75
None
None
None
None
None
None
5
Supermicro L2/L3 Switches Configuration Guide
Description
Enters the configuration mode.
Enable the DHCP server.
Exits the configuration mode.
Displays the DHCP server configuration
details.
Description
Enters the configuration mode.
Creates a name for the DHCP server
19