Supermicro SSE-G24-TG4 Configuration Manual page 20

Step 3 network <network-IP> [ { <mask> | / <prefix-
length (1-31)> } ] [<start-ip> [<end-ip>]]
Step 4 excluded-address <low-address><high-address >
Step 5 domain-name <domain (63)>
Step 6 dns-server <ip address>
Step 7 netbios-name-server <ip address>
netbios-node-type { <0-FF> | b-node | h-node |
Step 8
m-node | p-node }
Step 9 option <code (1-2147483647)> { ascii<string> |
hex <Hex String> | ip<address> }
address pool and enters the DHCP pool
configuration mode.
Specifies the subnet network number
and mask of the DHCP address pool.
Network-ip – A valid IPv4 address.
prefix-length - A valid IPv4 address with
a prefix length value of 1-32.
mask – A valid IP subnet mask.
start-ip and end-ip specifies the address
pool range
(Optional) Specifies the range of IP
addresses that the DHCP server must
not assign to DHCP clients in the range
of low-address to high-address.
(Optional) Specifies the domain name
for the client.
(Optional) Specifies the IP address of a
DNS server that is available to a DHCP
client.
(Optional) Specifies the NetBIOS WINS
server that is available to a Microsoft
DHCP client.
(Optional) Specifies the NetBIOS node
type for a Microsoft DHCP client.
1.6.2
b-node – Broadcast node
h-node – Hybrid node
m-node – Mixed node
p-node – Peer to peer node
(Optional) Configures the DHCP server
options.
1.6.3
Configurable DHCP options with their
Supermicro L2/L3 Switches Configuration Guide 20