Grizzly G0568 Owner's Manual page 8

Table Tilt
P
Figure 10. Table tilt controls.
P. Table Tilt Lock Lever: Secures table tilt
position on trunnion. Must be loosened before
table tilt is adjusted.
Q. Trunnion w/Table Tilt Scale: Functions as
a tilting base for table. Graduated in degrees
from 0° left–45° right for setting bevel angle.
R. Table Tilt Handwheel: Adjusts angle of table
tilt.
-6-
Q
R
Fence & Miter Gauge
S
V
Figure 11. Fence and miter gauge controls.
S. Fence: Used for ripping. Distance from blade
determines width of cut.
T. Miter Gauge Lock Knob: Secures angle
position of miter gauge.
U. Miter Gauge: Typically used for cross cuts.
Adjustable from 0°–60° left or right, and has
stops at 45°L and 45°R.
V. Fence Lock Handle: Secures fence position.
Model G0568/G0569 (Mfd. Since 10/11)
T
U