Grizzly G0568 Owner's Manual page 53

Blade Guide Rack and Pinion
Lubrication Type ........ GL2 Grease or Equivalent
Amount .................................................Thin Coat
Frequency .......................................... As Needed
To lubricate the blade guide rack and pinion:
1. DISCONNECT MACHINE FROM POWER!
2. Lower the blade guide until it reaches the
table.
3. Wipe off any existing grease and sawdust
buildup on the rack (see Figure 71).
Guide Post
Rack
Figure 71. Example of rack lubrication location.
4. Apply a thin coat of light all-purpose grease to
the rack.
5.
Move the blade guide up and down several
times and remove any excess grease to help
prevent sawdust buildup.
Model G0568/G0569 (Mfd. Since 10/11)
Blade Tension Adjustment Assembly
Lubrication Type ........ GL2 Grease or Equivalent
Amount .................................................Thin Coat
Frequency .......................................... As Needed
To lubricate the tension adjustment assembly:
1. DISCONNECT MACHINE FROM POWER!
2.
Open the top wheel cover and look through
the top of the wheel.
3.
Wipe off any existing grease and sawdust
buildup on the blade tension adjustment
assembly and tension lever cam.
4.
Apply a thin coat of grease to the tension
adjustment assembly and tension lever cam
(see Figure 72).
Figure 72. Tension adjustment assembly
locations (top wheel removed for clarity).
-51-