Installation - Omron S8BA-24D24D960SBF User Manual

3 Installation and connection
3-1

Installation

This section describes how to install the UPS.
For details on the precautions during installation, refer to For installation and connection on page 11.
The UPS permits the following installing methods. Choose the one best suited for the environment.
Precautions for Safe Use
Before installing this device, make a record of the serial number of this device.
The product serial number is required when contacting us about the device.
The product serial number is written on the sticker attached to the side of the UPS.
Correct positions
Note 1. This UPS can be mounted with the sides in close contact.
Up to 3 units can be mounted in close contact.
Follow the derating curve during mounting with the sides in close contact. For details, refer to A-2 Char-
acteristic data on page A-5.
2. When you install devices other than the UPS on the left or the right of the UPS, leave a space of at least
15 mm.
3 - 2
Leave 50 mm of space between the upper and lower.
Leave 50 mm of space between the upper and lower.
S8BA-series Uninterruptible Power Supply (UPS) User's Manual (U726)