Regulations And Standards - Omron S8BA-24D24D960SBF User Manual

Regulations and standards

Use overseas
To export (or provide to non-residents of Japan) a model of this product that is categorized as a mer-
chandise (or technology) requiring the export permission and approval stipulated by the Foreign
Exchange and Foreign Trade Law, the export permission and approval (or service transaction permis-
sion) in accordance with the said law are required.
Conformance to each Directive
Applicable directives
• EMC Directives
Principles regarding conformance
OMRON electronic devices that comply with EC Directives also conform to the related EMC stan-
dards so that they can be more easily built into other devices or the overall machine. The actual
products have been checked for conformity to EMC standards
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer. EMC-related performance of the OMRON devices that comply with EC
Directives will vary depending on the configuration, wiring, and other conditions of the equipment or
control panel on which the OMRON devices are installed. The customer must, therefore, perform
the final check to confirm that devices and the overall machine conform to EMC standards.
*1. Applicable EMC (Electromagnetic Compatibility) standards are as follows: EMS (Electromagnetic Susceptibil-
ity): EN 61000-6-2, EMI (Electromagnetic Interference): EN 61000-6-4, and EN 61000-6-4 Radiated emis-
sion: 10-m regulations
Conformance to EC Directives
This product complies with EC Directives. To ensure that the machine or device in which the this
product is used complies with EC Directives, the product must be installed as follows:
• This product must be installed within a control panel.
• You must use reinforced insulation or double insulation for the direct power supply equipment
connected to this product.
• Models of this product that comply with EC Directives also conform to the Common Emission
Standard. Radiated emission characteristics (10-m regulations), in particular, may vary depending
on the configuration of the control panel used, other devices connected to the control panel, wir-
ing, and other conditions. Therefore, even when using a model of this product that complies with
EC Directives, you must confirm and ensure the compliance to EC Directives of the entire
machine or equipment.
• This is a Class A product (for industrial environments). In a residential environment, it may cause
radio interference. If radio interference occurs, the user may be required to take appropriate mea-
sures.
Conformance to UL
• This product must be installed within a control panel with an internal heater or other unit to protect
against the formation of condensation (Standard mounting only).
• Gaps in the door to the control panel must be completely filled or covered with gaskets or other
material.
• For use in Pollution Degree 2 Environment.
S8BA-series Uninterruptible Power Supply (UPS) User's Manual (U726)
Regulations and standards
*
.
17