Connection; Ups Connection Order - Omron S8BA-24D24D960SBF User Manual

3-2

Connection

This section describes how to connect the UPS.
For details on the precautions during connection, refer to For installation and connection on page 11.
3-2-1

UPS connection order

Connections to the UPS must be made in the following order:
1
Connect the control unit and the battery unit with a battery connection cable.
Connecting the UPS control unit and battery unit with a battery connection cable on page 6
2
Connect the cables to be connected to the input terminal block and output terminal block at the
control unit side.
Connecting a cable to the battery terminal block, input terminal block and output terminal block
on page 9
3
Connect the UPS to the devices on the output terminal block.
Connecting a device to the output terminal block on page 8
4
Connect the UPS to the input power supply on the input terminal block.
Connecting the input power supply to the input terminal block on page 8
Note Sparks or noise may occur when connecting the UPS. This is not abnormal.
S8BA-series Uninterruptible Power Supply (UPS) User's Manual (U726)
3 Installation and connection
3
3 - 5