2
With the tip of the flat blade screwdriver in the hole, insert a cable into a round hole at the left of
the terminal block.
3
Pull out the flat blade screwdriver. Then, the cable is locked.
Removing a connected cable from the terminal block
1
Insert the tip of a flat blade screwdriver with a 3 mm or less thin blade into a square hole at the
right of the terminal block and pull out the cable.
2
Pull out the flat blade screwdriver.
S8BA-series Uninterruptible Power Supply (UPS) User's Manual (U726)
3 Installation and connection
3
3 - 11