Preparation; Separating Engine - Kubota GL6000 Workshop Manual

GL6000, GL7000, GL9000, GL11000, WSM

[2] PREPARATION

(1) Separating Engine

Draining Coolant
CAUTION
• Do not remove the radiator cap while operating or
immediately after stopping. Otherwise, hot water will spout
out from the radiator. Wait for more then 10 minutes to cool
the radiator, before opening the cap.
1. Place a vessel underneath the water drain plug (1).
2. Open the water drain plug (1), and remove the radiator cap to
completely drain the coolant.
3. After all coolant is drained, close the water drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" (G-9).
(1) Water Drain Plug
Draining Engine Oil
CAUTION
• Be sure to stop the engine before draining the engine oil.
1. After warming up, stop the engine.
2. Place an oil pan underneath the oil drain plug (1).
3. Open the oil drain plug (1), and remove the oil filler cap to
completely drain the engine oil.
4. After all engine oil is drained, close the oil drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" (G-9).
(1) Oil Drain Plug
1-S25
ENGINE
[A] GL6000, GL7000
[B] GL9000, GL11000
W1023465
[A] GL6000, GL7000
[B] GL9000, GL11000
W1023464
KiSC issued 05, 2015 A