GL6000, GL7000, GL9000, GL11000, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-11.)
[1] TIGHTENING TORQUES FOR SPECIAL USE SCREWS, BOLTS AND
NUT
NOTE
• In removing and applying the screws, bolts and nuts marked with " * ", pneumatic wrench or similar
pneumatic tool, if employed, must be used with enough care not to get them seized.
• For " * " marked screws, bolts and nuts on the table, apply engine oil to their threads and seats before
tightening.
[GL6000, GL7000]
Stator mounting screw
Rotor assembly mounting screw
PTO shaft mounting screw
Engine mounting nut
Generator mounting nut
[GL9000, GL11000]
Stator mounting screw
Rotor assembly mounting screw
Cooling fan mounting screw
Engine mounting nut
Generator mounting nut
Item
Item
N·m
5.9 to 8.8
34.3 to 44.1
48.1 to 55.9
19.6 to 27.4
19.6 to 27.4
N·m
18 to 22
19.6 to 27.4
19.6 to 27.4
53.9 to 68.6
53.9 to 68.6
2-S8
GENERATOR
kgf·m
lbf·ft
0.6 to 0.9
4.4 to 6.5
3.5 to 4.5
25.3 to 32.5
4.9 to 5.7
35.5 to 41.2
2.0 to 2.8
14.5 to 20.2
2.0 to 2.8
14.5 to 20.2
kgf·m
lbf·ft
1.9 to 2.2
14 to 16
2.0 to 2.8
14.5 to 20.2
2.0 to 2.8
14.5 to 20.2
5.5 to 7.0
39.8 to 50.6
5.5 to 7.0
39.8 to 50.6
W1046366
KiSC issued 05, 2015 A